Technology: Selective Laser Melting
Build Volume (mm): 410 x 410 x 400
Compatible MaterialsSS420, SS316L, Ti6Al4V, IN 718, IN 625, SS 17-4PH, AlSi10Mg etc.
ApplicationsFunctional Prototyping and end use parts for aerospace, medical implants, spare parts, automotive etc.
Technology: Selective Laser Melting
Build Volume (mm): 410 x 410 x 400
Compatible MaterialsSS420, SS316L, Ti6Al4V, IN 718, IN 625, SS 17-4PH, AlSi10Mg etc.
ApplicationsFunctional Prototyping and end use parts for aerospace, medical implants, spare parts, automotive etc.
Technology: Selective Laser Sintering
Build Volume (mm): 360 × 360 × 600
Compatible MaterialsPA12, PA11, PEEK, TPU, etc.
ApplicationsAerospace and Automotive parts
Technology: Photo polymerization
Build Volume (mm): 380 x 380 x 250
Compatible MaterialsLiquid Polymers
ApplicationsIt can develop with high accuracy and surface finish the investment Casting Patterns and Wind Tunnel Models. Other applications include Hot or coolant fluid flow visualization, HVAC components, under the hood testing, internal structures visualization, Electronic controls prototypes.
Technology: Continuous Filament Fabrication
Build Volume (mm): 320 x 132 x 154
Compatible MaterialsCarbon filled Nylon, Continuous glass fiber, carbon fiber, Kevlar fiber, High temperature High Strength Glass Fiber
Applications3D Printing of High strength and light weight Tooling, spares, jigs and fixtures, end use parts.
3D Laser Scanner
Accuracy: 30 Micron
Resolution: 50 micron
Part Size: 0.1-4m
ApplicationsReverse Engineering, Inspection, Restoration, Digital Inventory
3D Structured Light Scanner
Accuracy: 50 Micron
Resolution: 100 micron
Part Size: 5 (minimum)
ApplicationsReverse Engineering, Inspection, Restoration, Digital Inventory
Capacity: 500 × Ø250 mm
Materials that can be treated: Titanium, Super Alloys, Aluminum Alloys, SS Alloys
Variety of Components: Turbofan engine (Nozzle Guide Vanes, Rotor, and Injector etc.)
Applications:Aerospace, Biomedical, Tooling and automotive industries
Parameters: Ra, Rq, Rz (Ry (JIS) corresp. Rz), Rz (JIS), Rmax, Rp, RpA (ASME), Rpm (ASME), Rpk, Rk, Rvk, Mr1, Mr2, A1, A2, Vo, Rt, R3z, RPc, Rmr (tp (JIS, ASME) corresp. Rmr), RSm, RSk, RS, CR, CF, CL, R, Ar, Rx
Profile Resolution: 8nm
Stylus: 5 micron
Accuracy: 0.01mm
Resolution: 0.125mm
Part Size: 620mm
Dimensions: 900mm × 600mm × 1670mm
Working cabin size: 900mm × 600mm × 700mm
Compressed air source: Pressure: 5-7bar (kg/cm2); Flow rate: 0.8-1.2m3/min, dry compressed air.
ApplicationsClean the rough surface, descaling, residual salt and burr of forged castings, welding parts, heat treatment parts, stamping parts and machined parts. It is used in the pretreatment process before spraying and electroplating. This machine is also used to spray glass shots to strengthen the surface of the light-finished parts.
Type: Vacuum Tube Furnace
Tube Size: OD80×1000mm (Quartz)
Working Temperature: 1100 ℃
Max Temperature: 1200 ℃
Heating Zone: 300mm
Temperature control: 51 segment programmable and PID auto control
Max vacuum: 10Pa
Type: Muffle Furnace
Tube Size: 229 x 178 x 229 mm (Quartz)
Max Temperature: 1100 ℃
Temperature Uniformity: ± 8°C
Type: Natural Convection
Internal Chamber: 700 x 592 x 520 mm
Working Temperature: 1100 ℃
Max Temperature: 300 ℃
Heating Time: 58 min
Type: Muffle Furnace
Tube Size: 229 x 178 x 229 mm (Quartz)
Max Temperature: 1100 ℃
Temperature Uniformity: ± 8°C
Type: Ultra Violet
Internal Chamber: 35 x 35 x 35 mm
Turntable Platen Diameter: 35mm
UV Source: TLK 30W
