1. F. Javed, S. Hainzl, A. Aoudia, M. Qaisar, “Modeling of Kashmir Aftershock Decay Based on Static Coulomb Stress Changes and Laboratory-Derived Rate-and-State Dependent Friction Law”, Pure Appl. Geophys. 173, 5 (2016), 1559–1574, DOI: 10.1007/s00024-015-1192-9, IF: 1.677
  2. F. Sarwar, S. Iqbal, M. Qaisar, Abdul Rehman, F. Akhtar, S. M. Raza, “Earthquake Statistics and Earthquake Research Studies in Pakistan”, Open Journal of Earthquake Research (2016), 5, 97-104
  3. H. Shahzad, M. F. Sadaqat, B. Hassan, “Parallel MRI Reconstruction Algorithm Implementation on GPU”, Applied Magnetic Resonance 47 (1) 53-61, 2016, IF: 0.884
  4. Irfan, A. Shafa, A. Nisar, H. Shahzad, “Sensitivity Maps Estimation Using Eigenvalues in Sense Reconstruction” Applied Magnetic Resonance 47(5) 487-498, 2016, IF: 0.884
  5. Khan M, Aslam T, Shahzad H, Omer H. Line Profile Measure as a Stopping Criterion in CG-SENSE Algorithm. Applied Magnetic Resonance, 1-4, IF: 0.884
  6. Status report of the upgrade of the CMS muon system with Triple-GEM detectors, Nuclear Instruments & Methods In Physics Research Section A, Accelerators Spectrometers Detectors And Associated Equipment, 824, 521-525, 2016, IF: 1.200
  7. Fiber Bragg Grating (FBG) sensors as flatness and mechanical stretching sensors, Nuclear Instruments & Methods In Physics Research Section A-Accelerators Spectrometers Detectors And Associated Equipment, 824, 493-495, 2016, IF: 1.200
  8. Radiation tests of real-sized prototype RPCs for the Phase-2 Upgrade of the CMS Muon System, Journal of Instrumentation, 11, C08008, 2016, IF: 1.310
  9. Search for third-generation scalar leptoquarks in the t tau channel in proton-proton collisions at root s = 8 TeV (vol 7, 042, 2015), Journal of High Energy Physics, 11, 056, 2016 (Correction), IF: 6.023
  10. Detector control system and efficiency performance for CMS RPC at GIF plus, Journal of Instrumentation, 11, C10013, 2016, IF: 1.310
  11. R&D towards the CMS RPC Phase-2 upgrade, Group Author(s): CMS Collaboration, Journal of Instrumentation”, 11, C09017, 2016, IF: 1.310
  12. Search for the associated production of a Higgs boson with a single top quark in proton-proton collisions at root s=8 TeV”, Journal of High Energy Physics, 6, 177, 2016, IF: 6.023
  13. Search for pair-produced vectorlike B quarks in proton-proton collisions at root s=8 TeV”, Physical Review D, 93, 11, 112009, 2016, IF: 4.506
  14. Forward-backward asymmetry of Drell-Yan lepton pairs in pp collisions at root s=8 , European Physical Journal C 76(6), 325, 2016, IF: 4.912
  15. Search for lepton flavour violating decays of heavy resonances and quantum black holes to an e mu pair in proton-proton collisionsat root s=8 TeV, European Physical Journal C76 (6), 317, 2016, IF: 4.912
  16. Search for supersymmetry in pp collisions at root s=8 TeV in final states with boosted W bosons and b jets using razor variables, Physical Review D 93 (9),: 092009, 2016, IF: 4.506
  17. Measurement of the ratio B(B-s(0) -> J/psi f(0)(980))/B(B-s(0) -> J/psi phi(1020)) in pp collisions at root s=7 TeV, Physics Letters B 756, 84-102, 2016, IF: 4.787
  18. Search for new phenomena in monophoton final states in proton-proton collisions at root s=8 TeV, Physics Letters B 755, 102-124, 2016, IF: 4.787
  19. High rate, fast timing Glass RPC for the high eta CMS muon detectors, Journal Of Instrumentation, 11, C09006, 2016, IF: 1.310
  20. Design of a constant fraction discriminator for the VFAT3 front-end ASIC of the CMS GEM detector, JOURNAL oF Instrumentation 11, : C01023, 2016 (Review), IF: 1.310
  21. Measurement of the top quark mass using charged particles in pp collisions at √ s = 8 TeV / CMS Collaboration, Phys. Rev. D 93 (2016) 092006, IF: 4.506
  22. Search for heavy Majorana neutrinos in e±e±+ jets and e±μ±+ jets events in proton-proton collisions at √ s = 8 TeV / CMS Collaboration, J. High Energy Phys. 04 (2016) 169, IF: 6.023
  23. Search for supersymmetry in the multijet and missing transverse momentum final state in pp collisions at 13 TeV / CMS Collaboration, Phys. Lett. B 758 (2016) 152, IF: 4.787
  24. Search for massive WH resonances decaying into the ℓνbb¯ final state at √ s = 8 TeV / CMS Collaboration, Eur. Phys. J. C 76 (2016) 237, IF: 4.912
  25. Measurements of tt¯ spin correlations and top quark polarization using dilepton final states in pp collisions at √ s = 8 TeV / CMS Collaboration, Phys. Rev. D 93 (2016) 052007, IF: 4.506
  26. Correlations between jets and charged particles in PbPb and pp collisions at √sNN= 2.76 TeV / CMS Collaboration, J. High Energy Phys. 02 (2016) 156, IF: 6.023
  27. Measurement of differential and integrated fiducial cross sections for Higgs boson production in the four-lepton decay channel in pp collisions at √ s = 7 and 8 TeV / CMS Collaboration, J. High Energy Phys. 04 (2016) 005, IF: 6.023
  28. Search for supersymmetry in events with soft leptons, low jet multiplicity, and missing transverse energy in proton-proton collisions at √ s = 8 TeV / CMS Collaboration, Phys. Lett. B 759 (2016) 9, IF: 4.787
  29. Study of Z boson production in pPb collisions at √sNN= 5.02 TeV / CMS Collaboration Phys. Lett. B 759 (2016) 36, IF: 4.787
  30. Measurement of the inclusive jet cross section in pp collisions at √ s = 2.76 TeV / CMS Collaboration, Eur. Phys. J. C 76 (2016) 265, IF: 4.912
  31. Search for narrow resonances decaying to dijets in proton-proton collisions at √ s = 13 TeV / CMS Collaboration, Phys. Rev. Lett. 116 (2016) 071801, IF: 7.645
  32. Event generator tunes obtained from underlying event and multiparton scattering measurements / CMS Collaboration, Eur. Phys. J. C 76 (2016) 155, IF: 4.912
  33. Search for dark matter and unparticles produced in association with a Z boson in proton-proton collisions at √ s = 8 TeV / CMS Collaboration, Phys. Rev. D 93 (2016) 052011, IF: 4.506
  34. Search for anomalous single top quark production in association with a photon in pp collisions at √ s = 8 TeV / CMS Collaboration, J. High Energy Phys. 04 (2016) 035, IF: 6.023
  35. Measurement of top quark polarisation in t-channel single top quark production / CMS Collaboration, J. High Energy Phys. 04 (2016) 073, IF: 6.023
  36. Search for excited leptons in proton-proton collisions at √ s = 8 TeV / CMS Collaboration, J. High Energy Phys. 03 (2016) 125, IF: 6.023
  37. Reconstruction and identification of τ lepton decays to hadrons and ντ at CMS / CMS Collaboration, J. Instrum. 11 (2016) P01019, IF: 1.310
  38. Search for a very light NMSSM Higgs boson produced in decays of the 125 GeV scalar boson and decaying into τ leptons in pp collisions at √s = 8 TeV / CMS Collaboration, J. High Energy Phys. 01 (2016) 079, IF: 6.023
  39. Measurement of the top quark pair production cross section in proton-proton collisions at √ s = 13 TeV / CMS Collaboration, Phys. Rev. Lett. 116 (2016) 052002, IF: 7.645
  40. Transverse momentum spectra of inclusive b jets in pPb collisions at √sNN= 5.02 TeV / CMS Collaboration, Phys. Lett. B 754 (2016) 59, IF: 4.787
  41. Measurement of long-range near-side two-particle angular correlations in pp collisions at √ s = 13 TeV / CMS Collaboration, Phys. Rev. Lett. 116 (2016) 172302, IF: 7.645
  42. Searches for a heavy scalar boson H decaying to a pair of 125 GeV Higgs bosons hh or for a heavy pseudoscalar boson A decaying to Zh, in the final states with h→ττ / CMS Collaboration, Phys. Lett. B 755 (2016) 217-244, IF: 4.787
  43. Observation of top quark pairs produced in association with a vector boson in pp collisions at √ s = 8 TeV / CMS Collaboration, J. High Energy Phys. 01 (2016) 096, IF: 6.023
  44. Measurement of transverse momentum relative to dijet systems in PbPb and pp collisions at √sNN= 2.76 TeV / CMS Collaboration, J. High Energy Phys. 01 (2016) 006, IF: 6.023
  45. Search for the production of an excited bottom quark decaying to tW in proton-proton collisions at √ s = 8 TeV / CMS Collaboration, J. High Energy Phys. 01 (2016) 166, IF: 6.023
  46. Measurement of the tt¯ production cross section in the all-jets final state in pp collisions at √ s = 8 TeV / CMS Collaboration, Eur. Phys. J. C 76 (2016) 128, IF: 4.912
  47. Search for W' → tb in proton-proton collisions at √ s = 8 TeV / CMS Collaboration, J. High Energy Phys. 02 (2016) 122, IF: 6.023
  48. Search for vectorlike charge 2/3 T quarks in proton-proton collisions at √ s = 8 TeV / CMS Collaboration, Phys. Rev. D 93 (2016) 012003, IF: 4.506
  49. Measurement of the top quark mass using proton-proton data at √ s = 7 and 8 TeV / CMS Collaboration, Phys. Rev. D 93 (2016) 072004, IF: 4.506
  50. Search for single production of scalar leptoquarks in proton-proton collisions at √ s = 8 TeV / CMS Collaboration, Phys. Rev. D 93 (2016) 032005, IF: 4.506
  51. Search for pair production of first and second generation leptoquarks in proton-proton collisions at √ s = 8 TeV / CMS Collaboration, Phys. Rev. D 93 (2016) 032004, IF: 4.506
  52. Measurement of differential cross sections for Higgs boson production in the diphoton decay channel in pp collisions at √s = 8 TeV / CMS Collaboration, Eur. Phys. J. C 76 (2016) 13, IF: 4.912
  53. Study of B meson production in pPb collisions at √sNN= 5.02 TeV using exclusive hadronic decays / CMS Collaboration, Phys. Rev. Lett. 116 (2016) 032301, IF: 7.645
  54. Search for W' decaying to tau lepton and neutrino in proton-proton collisions at √ s = 8 TeV / CMS Collaboration, Phys. Lett. B 755 (2016) 196-216, IF: 4.787
  55. Measurement of the charge asymmetry in top quark pair production in pp collisions at √ s = 8 TeV using a template method / CMS Collaboration, Phys. Rev. D 93 (2016) 034014, IF: 4.506
  56. Search for neutral MSSM Higgs bosons decaying to μ+μ− in pp collisions at √ s = 7 and 8 TeV / CMS Collaboration, Phys. Lett. B 752 (2016) 221, IF: 4.787
  57. Search for supersymmetry in events with a photon, a lepton, and missing transverse momentum in pp collisions at √ s = 8 TeV / CMS Collaboration, Phys. Lett. B 757 (2016)6, IF: 4.787
  58. Angular analysis of the decay B0→K∗0μ+μ− from pp collisions at √ s = 8 TeV / CMS Collaboration, Phys. Lett. B 753 (2016) 424, IF: 4.787
  59. Measurement of the CP-violating weak phase ϕs and the decay width difference ΔΓs using the B0s→J/ψϕ(1020) decay channel in pp collisions at √ s = 8 TeV / CMS Collaboration, Phys. Lett. B 757 (2016) 97-120, IF: 4.787
  60. Inclusive and differential measurements of the tt¯ charge asymmetry in pp collisions at √ s = 8 TeV / CMS Collaboration, Phys. Lett. B 757 (2016) 154, IF: 4.787
  61. Search for a Higgs boson decaying into γ∗γ→ℓℓγ with low dilepton mass in pp collisions at √ s = 8 TeV / CMS Collaboration, Phys. Lett. B 753 (2016) 341, IF: 4.787
  62. Search for exotic decays of a Higgs boson into undetectable particles and one or more photons / CMS Collaboration, Phys. Lett. B 753 (2016) 363, IF: 4.787
  63. Search for resonant tt¯ production in proton-proton collisions at √ s = 8 TeV / CMS Collaboration , Phys. Rev. D 93 (2016) 012001, IF: 4.506
  64. Search for a massive resonance decaying into a Higgs boson and a W or Z boson in hadronic final states in proton-proton collisions at √s = 8 TeV / CMS Collaboration, J. High Energy Phys. 02 (2016) 145, IF: 6.023
  65. A search for pair production of new light bosons decaying into muons / CMS Collaboration, Phys. Lett. B 752 (2016) 146-168, IF: 4.787
  66. Search for long-lived charged particles in proton-proton collisions at √ s = 13 TeV / CMS Collaboration, Phys. Rev. D 94 (2016) 112004, DOI: 10.1103/PhysRevD.94.112004, IF: 4.506
  67. Decomposing transverse momentum balance contributions for quenched jets in PbPb collisions at √sNN= 2.76 TeV / CMS Collaboration, J. High Energy Phys. 11 (2016) 055, DOI: 10.1007/JHEP11(2016)055 IF:6.023
  68. Measurement of the ZZ production cross section and Z→ℓ+ℓ−ℓ′+ℓ′− branching fraction in pp collisions at √ s = 13 TeV / CMS Collaboration, Phys. Lett. B 763 (2016) 280, DOI: http://dx.doi.org/10.1016/j.physletb.2016.10.054, IF: 4.787
  69. Measurement of electroweak production of a W boson and two forward jets in proton-proton collisions at √ s = 8 TeV / CMS Collaboration, J. High Energy Phys. 11 (2016) 147, DOI: 10.1007/JHEP11(2016)147, IF: 6.023
  70. Search for lepton flavour violating decays of the Higgs boson to eτ and eμ in proton-proton collisions at √ s = 8 TeV / CMS Collaboration, Phys. Lett. B 763 (2016) 472-500, DOI: 10.1016/j.physletb.2016.09.062, IF: 4.787
  71. Observation of the decay B+→ψ(2S)ϕ(1020)K+ in pp collisions at √ s = 8 TeV / CMS Collaboration, Phys. Lett. B 764 (2017) 66, DOI: http://dx.doi.org/10.1016/j.physletb.2016.11.001, IF: 4.787
  72. Measurement of the differential cross sections for top quark pair production as a function of kinematic event variables in pp collisions at √s = 7 and 8 TeV / CMS Collaboration, Phys. Rev. D 94 (2016) 052006, DOI: 10.1103/PhysRevD.94.052006 IF: 4.506
  73. Search for resonant production of high-mass photon pairs in proton-proton collisions at √ s = 8 and 13 TeV / CMS Collaboration, Phys. Rev. Lett. 117 (2016) 051802, DOI: https://doi.org/10.1103/PhysRevLett.117.051802 IF: 5.936, IF: 7.645
  74. Phenomenological MSSM interpretation of CMS searches in pp collisions at √ s = 7 and 8 TeV / CMS Collaboration, J. High Energy Phys. 10 (2016) 129, DOI: 10.1007/JHEP10(2016)129, IF: 6.023
  75. Measurements of the Higgs boson production and decay rates and constraints on its couplings from a combined ATLAS and CMS analysis of the LHC pp collision data at √ s = 7 and 8 TeV / ATLAS and CMS Collaborations, J. High Energy Phys. 08 (2016) 045, DOI: 10.1007/ JHEP08(2016)045, IF: 6.023
  76. Measurement of the W boson helicity fractions in the decays of top quark pairs to lepton+jets final states produced in pp collisions at √s = 8 TeV / CMS Collaboration, Phys. Lett. B 762 (2016) 512-534, DOI: 10.1016/j.physletb.2016.10.007, IF: 4.787
  77. Search for supersymmetry in pp collisions at √ s = 13 TeV in the single-lepton final state using the sum of masses of large -radius jets / CMS Collaboration, J. High Energy Phys. 08 (2016) 122, DOI: 10.1007/JHEP08(2016)122, IF: 6.023
  78. Measurement of the double-differential inclusive jet cross section in proton-proton collisions at √ s = 13 TeV / CMS Collaboration, Eur. Phys. J. C 76 (2016) 451, DOI: 10.1140/epjc/s10052-016-4286-3, IF: 4.912
  79. Search for new physics in same-sign dilepton events in proton-proton collisions at √ s = 13 TeV / CMS Collaboration , Eur. Phys. J. C 76 (2016) 439, DOI: 10.1140/epjc/s10052-016-4261-z, IF: 4.912
  80. Search for Higgs boson off-shell production in proton-proton collisions at 7 and 8 TeV and derivation of constraints on its total decay width / CMS Collaboration, J. High Energy Phys. 09 (2016) 051, DOI: 10.1007/JHEP09(2016)051, IF: 6.023
  81. Search for narrow resonances in dijet final states at √ s = 8 TeV with the novel CMS technique of data scouting / CMS Collaboration, Phys. Rev. Lett. 117 (2016) 031802, DOI: 10.1103/PhysRevLett.117.031802, IF: 7.645
  82. Measurement of the integrated and differential tt¯ production cross sections for high-pT top quarks in pp collisions at √s = 8 TeV / CMS Collaboration, Phys. Rev. D 94 (2016) 072002, DOI: https://doi.org/10.1103/PhysRevD.94.072002 IF: 4.506
  83. Evidence for exclusive γγ→W+W− production and constraints on anomalous quartic gauge couplings in pp collisions at √s = 7 and 8 TeV / CMS Collaboration, J. High Energy Phys. 08 (2016) 119, DOI: 10.1007/JHEP08(2016)119, IF: 6.023
  84. Search for two Higgs bosons in final states containing two photons and two bottom quarks in proton-proton collisions at 8 TeV / CMS Collaboration, Phys. Rev. D 94 (2016) 052012, DOI: https://doi.org/10.1103/PhysRevD.94.052012 IF: 4.506
  85. Measurements of tt¯ charge asymmetry using dilepton final states in pp collisions at √ s = 8 TeV / CMS Collaboration, Phys. Lett. B 760 (2016) 365, DOI: http://dx.doi.org/10.1016/j.physletb.2016.07.006, IF: 4.787
  86. Search for new physics with the MT2 variable in all-jets final states produced in pp collisions at √ s = 13 TeV / CMS Collaboration, J. High Energy Phys. 10 (2016) 006, DOI: 10.1007/JHEP10(2016)006, IF: 6.023
  87. Search for neutral resonances decaying into a Z boson and a pair of b jets or τ leptons / CMS Collaboration, Phys. Lett. B 759 (2016) 369, DOI: http://dx.doi.org/10.1016/j.physletb.2016.05.087, IF: 4.787
  88. Υ(nS) polarizations versus particle multiplicity in pp collisions at √ s = 7 TeV / CMS Collaboration, Phys. Lett. B 761 (2016) 31, DOI: http://dx.doi.org/10.1016/j.physletb.2016.07.065, IF: 4.787
  89. Search for s channel single top quark production in pp collisions at √ s = 7 and 8 TeV / CMS Collaboration, J. High Energy Phys. 09 (2016) 027, DOI: 10.1007/JHEP09(2016)027, IF: 6.023
  90. Measurement of the tt¯ production cross section in the eμ channel in proton-proton collisions at √ s = 7 and 8 TeV / CMS Collaboration, J. High Energy Phys. 08 (2016) 029, DOI: 10.1007/JHEP08(2016)029, IF: 6.023
  91. Measurement of the differential cross section and charge asymmetry for inclusive pp→W±+X production at √ s = 8 TeV / CMS Collaboration, Eur. Phys. J. C 76 (2016) 469, DOI: 10.1140/epjc/s10052-016-4293-4, IF: 4.912
  92. Search for direct pair production of supersymmetric top quarks decaying to all-hadronic final states in pp collisions at √ s = 8 TeV / CMS Collaboration, Eur. Phys. J. C 76 (2016) 460, DOI: 10.1140/epjc/s10052-016-4292-5, IF: 4.912
  93. Search for heavy resonances decaying to two Higgs bosons in final states containing four b quarks / CMS Collaboration, Eur. Phys. J. C 76 (2016) 371, DOI: 10.1140/epjc/s10052-016-4206-6, IF: 4.912
  94. Search for supersymmetry in electroweak production with photons and large missing transverse energy in pp collisions at √ s = 8 TeV / CMS Collaboration, Phys. Lett. B 759 (2016) 479, DOI: http://dx.doi.org/10.1016/j.physletb.2016.05.088, IF: 4.787
  95. Measurement of the Zγ→νν¯γ production cross section in pp collisions at √ s = 8 TeV and limits on anomalous ZZγ and Zγγ trilinear gauge boson couplings / CMS Collaboration, Phys. Lett. B 760 (2016) 448, DOI: http://dx.doi.org/10.1016/j.physletb.2016.06.080, IF: 4.787
  96. Measurement of dijet azimuthal decorrelation in pp collisions at √ s = 8 TeV / CMS Collaboration, Eur. Phys. J. C 76 (2016) 536, DOI: 10.1140/epjc/s10052-016-4346-8, IF: 4.912
  97. Search for R-parity violating decays of a top squark in proton-proton collisions at √ s = 8 TeV / CMS Collaboration, Phys. Lett. B 760 (2016) 178, DOI: 10.1016/j.physletb.2016.06.039, IF: 4.787
  98. Combined search for anomalous pseudoscalar HW couplings in VH production and H → VV decay / CMS Collaboration, Phys. Lett. B 759 (2016) 672, DOI: http://dx.doi.org/10.1016/j.physletb.2016.06.004, IF: 4.787
  99. Search for direct pair production of scalar top quarks in the single- and dilepton channels in proton-proton collisions at √ s = 8 TeV / CMS Collaboration, J. High Energy Phys. 09 (2016) 056, DOI: 10.1007/JHEP07(2016)027, IF: 6.023 (Correction)
  100. Azimuthal decorrelation of jets widely separated in rapidity in pp collisions at √ s = 7 TeV / CMS Collaboration, J. High Energy Phys. 08 (2016) 139, DOI: 10.1007/JHEP08(2016)139, IF: 6.023
  101. Measurement of inclusive jet production and nuclear modifications in pPb collisions at √sNN= 5.02 TeV / CMS Collaboration, Eur. Phys. J. C 76 (2016) 372, DOI: 10.1140/epjc/s10052-016-4205-7, IF: 4.912
  102. Measurement of spin correlations in tt¯ production using the matrix element method in the muon+jets final state in pp collisions at √s = 8 TeV / CMS Collaboration, Phys. Lett. B 758 (2016) 321-346, DOI: 10.1016/j.physletb.2016.05.005, IF: 4.787
  103. Search for a low-mass pseudoscalar Higgs boson produced in association with a bb¯ pair in pp collisions at √ s = 8 TeV / CMS Collaboration, Phys. Lett. B 758 (2016) 296, DOI: http://dx.doi.org/10.1016/j.physletb.2016.05.003, IF: 4.787
  104. Measurement of tt¯ production with additional jet activity, including b quark jets, in the dilepton decay channel using pp collisions at √s = 8 TeV / CMS Collaboratio, Eur. Phys. J. C 76 (2016) 379, DOI: 10.1140/epjc/s10052-016-4105-x, IF: 4.912
  105. Measurement of the inelastic cross section in proton-lead collisions at √sNN= 5.02 TeV / CMS Collaboration, Phys. Lett. B 759 (2016) 641, DOI: 10.1016/j.physletb.2016.06.027, IF: 4.787
  106. M. Khan, N. Shahzad, CY. Xiong, Ali. Naveed, S.A. Rakha, C. Xiong, “Dispersion behavior and the influences of ball milling technique on functionalization of detonated nano-diamonds”, Diamond And Related Materials 61, 32-40, 2016, IF: 2.125
  107. Khurram, A. A.; Raza, M. Aamir; Zhou, Peiheng, “A study of the nanocomposite sandwich structures for broadband microwave absorption and flexural strength” Journal Of Sandwich Structures & Materials 18(6), 739-753, 2016, IF: 2.852
  108. Muzaffar, M. Usman, Safeer, S.Hamza; N.A Khan, A. A. Khurram “Modified synthesis route to achieve Sr substituted Cu0.5Tl0.5-1234 superconductor phase”, Materials Chemistry and Physics 181, 384-390, 2016, IF: 2.101
  109. Honey, Shehla; Thema, F. T.; Bhatti, M. T., “Influence Of Kilo-Electron-Volt Oxygen Ion Irradiation On Structural, Electrical And Optical Properties Of Cdte Thin Films” Surface Review And Letters 23(1), 1550085, 2016, IF: 0.435
  110. Ullah, Hameed, Naveed Ali, Sohail, Muhammad; Malik, Uzma, “Preparation, characterization and optoelectronic properties of nanodiamonds doped zinc oxide nanomaterials by a ball milling technique” Materials Research Express 3(7), 075016, 2016, IF: 0.968
  111. H. Liu, D. Wan, I. Ahmad, L. Chen, SiqiShi, H. Luo and Y. Gao, “Sputtering Deposition of Sandwich-structured V2O5/metal (V, W)/V2O5 Multi-layers for the Preparation of High-Performance Thermal Sensitive VO2 Thin Films with Selectivity of VO2 (B) and VO2 (M) Polymorph”, ACS Applied Materials & Interfaces (2016), 8 (12), 7884–7890, IF: 7.145
  112. A. Fazal, T. Jan, J. Iqbal, M. S H Naqvi, F. Abbas, I. Ahmad, “Inhibition of Neuroblastoma cancer cells viability by ferromagnetic Mn doped CeO2 monodisperse nanoparticles mediated through reactive oxygen species”, Mat. Chem. in Phys. 173 (2016), 146-151, IF: 2.101
  113. H. Shehla, S. Naseem, I. Ahmad, M. Malik, M. T. Bhatti, and D. Wan, “Large scale silver nanowires network fabricated by MeV hydrogen (H+) ion beam irradiation”, Chin. Phys. B 25 (2016), 046105, IF: 1.436
  114. F. Mehmood , J. Iqbal, T. Jan, W. Ahmed , W. Ahmed , A. Arshad , Q. Mansoor , S. Z. Ilyas , M. Ismail , I. Ahmad, “Effect of Sn Doping on the Structural, Optical, Electrical and Anticancer Properties of WO3 Nanoplates”, Ceramics International, DOI: /10.1016/j.ceramint.2016.04.010, IF: 2.758
  115. H Shehla, I. Ahmad, Y. Khan, J. Iqbal, R. Saira, N. Shahzad, M. Malik, “Ion beam irradiation-induced nano-welding of Ag nanowires”, Micro and nano lett. 11 (2016), 34-37, IF: 0.723
  116. K. Shahzad, F.J. Qureshi, J. Taj, A. Awais, J. Hussain, W. Akram, S. Honey, I. Ahmad, M. Malik, “Differential elastic scattering cross sections of protons from Al in the 2.4 – 4.8 MeV energy range”, Nuclear Science and Techniques (2016), DOI:10.1007/s41365-016-0037-2, IF: 0.641
  117. M. A. Khan, A. Qayyum , I. Ahmad , T. Iqbal , A. A. Khan , R. Waleed , B. Mohuddin , M. Malik, “Copper Ion Beam Irradiation-Induced Effects on Structural, Morphological and Optical Properties of Tin Dioxide Nanowires”, Chin. Phys. Lett. 33, 7 (2016), 078102, IF: 0.875
  118. S. A. Khan, A. B. Ziya, A. Ibrahim, S. Atiq, M. Usman, N. Ahmad, M. Shakeel, “Enhancement of Curie temperature (Tc) and Magnetization of Fe-Ni Invar alloy through Cu substitution and with He+2 Ion irradiation”, Journal of Electronic Materials 46 (2016), 2258-2265, IF:1.491
  119. M. Usman, S.S. Suvanam, M.G. Yazdi, M. Götelid, M. Sultan, A. Hallén, “Stoichiometry of the ALD-Al2O3/4H-SiC interface by synchrotron-based XPS”, Journal of Physics D: Applied Physics 2016, 49, 255308, IF: 2.772
  120. Z. Iqbal, M. H. Asghar, M. Usman, A. ul Haq, A. Ismatullah, Nazir A. Naz, I. Ahmed, “Dual Band Nano Structured Anti Reflection thin Film Coatings”, Protection of Metals and Physical Chemistry of Surfaces 52 (2016), 481–485, IF: 0.609
  121. M. Etter, A. Nigar, N. Z. Ali, Z. Akhter, R. E. Dinnebier, “Synthesis, spectroscopic and structural perspective of new ferrocenyl amides”, Solid State Science (2016), 55, 29–35, IF: 2.041
  122. H. Shehla , I. Ahmad, Ali Awais, F.T. Thema, I. Javed, D. Wang, K. Rauf, K. Nasir, S. Naseem, M. Maaza, “ Silver nanowires stability and burying into substrates under MeV proton irradiation”, Current Nanoscience. 12(6) 774-780 (2016), IF: 0.934
  123. H. Shehla, F.T. Thema, I. Ahmad, N. Z. Ali, I. Javed, D. Wan, M. Maaza, “gamma-Rays Irradiation Induced Structural and Morphological Changes in Copper Nanowires”, Journal of Nanomaterials 6134801, (2016) IF: 1.758
  124. M. Fiaz Khan, K. Siraj, M. S. Anwar, M. Irshad, J. Hussain, S. Faiz, Majeed, et al., “700 keV Ni+2 ions induced modification in structural, surface, magneto-optic and optical properties of ZnO thin films”, Nuclear Instruments and Methods in Physics B, 368 (2016) 45-49, IF: 1.389
  125. S. S. Suvanam, M. G. Yazdi, M. Usman, M. Götelid, A. Hallén, “Interface Analysis of p-type 4H-SiC/Al2O3 using Synchrotron-based XPS”, Materials Science Forum 858 (2016), 693-696
  126. Siddiqui, Jamil; Hussain, Tousif; Ahmad, Riaz, Z. A. Umar “Structural, morphological and mechanical properties of niobium nitride thin films grown by ion and electron beams emanated from plasma” Radiation Effects And Defects In Solids 171(5-6), 421-439, 2016, IF: 0.472
  127. M.A. Kalyar, A. Yar, J. Iqbal, R. Ali, M.A. Baig, “Measurements of photoionization cross section of the 4p levels and oscillator strength of the 4p→ nd 2D 3/2, 5/2 transitions of potassium”, Opt. Laser Tech. 77(2016), 72 , IF: 1.879
  128. J. Iqbal, R. Ahmed, M. Rafique, M. Anwar-ul-Haq, M.A. Baig, “Spatial diagnostics of the laser-produced tin plasma in air”, Laser Physics 26(2016), 076001, IF: 1.102
  129. Z. A. Umar, R. Ahmad, R. S. Rawat, M. A. Baig, J. Siddiqui, and T. Hussain,“Structural and mechanical properties of Al–C–N films deposited at room temperature by plasma focus device”, Chin. Phys. B: 25(2016), 075201, IF: 1.436
  130. M. Qasim, M. Anwar-ul-Haq, M.S. Afgan, M.A. Kalyar, M.A. Baig, “Elemental Analysis of Black Salt by Laser-Induced Breakdown Spectroscopy and Inductively Coupled PlasmA-Optical Emission Spectroscopy, Anal. Lett. 49, 2108 (2016), IF: 1.088
  131. M. Truger, O. M. Roscioni, C. Röthel, D. Kriegner, C. Simbrunner, R. Ahmed, E. D. Glowacki, J. Simbrunner, I. Salzmann, A. M. Coclite, A. Jones, R. Resel, “Surface-Induced Phase of Tyrian Purple (6, 6’-Dibromoindigo): Thin Film Formation and Stability”, Cryst Growth Des. 16, 3647 (2016), IF: 4.425
  132. Q. Abbass, N. Ahmed, R. Ahmed, M.A. Baig, “A Comparative Study of Calibration Free Methods for the Elemental Analysis by Laser Induced Breakdown Spectroscopy”, Plasma Chemistry and Plasma Processing 36 (5), 1287 (2016), IF: 1.811
  133. R. Ahmed, Nasar Ahmed, J. Iqbal, M. A. Baig, “An inexpensive technique for the time resolved laser induced plasma spectroscopy”, Physics of plasmas 23, 083101 (2016), IF: 2.207
  134. M. Saleem, S. Hussain, M. A. Zia, S. Mahmood, M. A. Baig, “Laser induced isotopic studies using time of flight mass spectrometer”, Optik-Int. J. Light and Electron Optics127, 9885 (2016), IF: 0.742
  135. Nasar Ahmed, R. Ahmed, M. Rafique, M. A. Baig, “A Comparative Study of Cu-Ni Alloy using LIBS, LA-TOF, EDX and XRF”, Laser and Particle Beams, DOI: 10.1017/S0263034616000732, IF: 1.649
  136. Z. A Umar, R.S. Rawat, R. Ahmad, Z. Chen, Z Zhang, J Siddiqui, A Hussnain, T Hussain, M.A. Baig, “Structural, compositional and hardness properties of hydrogenated amorphous carbon nitride thin films synthesized by dense plasma focus device”, Surf. Interface Anal. (2016), DOI: 10.1002/sia.6192, IF: 1.018
  137. Siddiqui, Jamil; Hussain, Tousif; Ahmad, Riaz, Z. A. Umar “Structural, morphological and mechanical properties of niobium nitride thin films grown by ion and electron beams emanated from plasma” Radiation Effects And Defects In Solids 171(5-6), 421-439, 2016, IF: 0.472
  138. M.A. Kalyar, A. Yar, J. Iqbal, R. Ali, M.A. Baig, “Measurements of photoionization cross section of the 4p levels and oscillator strength of the 4p→ nd 2D 3/2, 5/2 transitions of potassium”, Opt. Laser Tech. 77(2016), 72 , IF: 1.879
  139. J. Iqbal, R. Ahmed, M. Rafique, M. Anwar-ul-Haq, M.A. Baig, “Spatial diagnostics of the laser-produced tin plasma in air”, Laser Physics 26(2016), 076001, IF: 1.102
  140. Z. A. Umar, R. Ahmad, R. S. Rawat, M. A. Baig, J. Siddiqui, and T. Hussain,“Structural and mechanical properties of Al–C–N films deposited at room temperature by plasma focus device”, Chin. Phys. B: 25(2016), 075201, IF: 1.436
  141. M. Qasim, M. Anwar-ul-Haq, M.S. Afgan, M.A. Kalyar, M.A. Baig, “Elemental Analysis of Black Salt by Laser-Induced Breakdown Spectroscopy and Inductively Coupled PlasmA-Optical Emission Spectroscopy, Anal. Lett. 49, 2108 (2016), IF: 1.088
  142. M. Truger, O. M. Roscioni, C. Röthel, D. Kriegner, C. Simbrunner, R. Ahmed, E. D. Glowacki, J. Simbrunner, I. Salzmann, A. M. Coclite, A. Jones, R. Resel, “Surface-Induced Phase of Tyrian Purple (6, 6’-Dibromoindigo): Thin Film Formation and Stability”, Cryst Growth Des. 16, 3647 (2016), IF: 4.425
  143. Q. Abbass, N. Ahmed, R. Ahmed, M.A. Baig, “A Comparative Study of Calibration Free Methods for the Elemental Analysis by Laser Induced Breakdown Spectroscopy”, Plasma Chemistry and Plasma Processing 36 (5), 1287 (2016), IF: 1.811
  144. R. Ahmed, Nasar Ahmed, J. Iqbal, M. A. Baig, “An inexpensive technique for the time resolved laser induced plasma spectroscopy”, Physics of plasmas 23, 083101 (2016), IF: 2.207
  145. M. Saleem, S. Hussain, M. A. Zia, S. Mahmood, M. A. Baig, “Laser induced isotopic studies using time of flight mass spectrometer”, Optik-Int. J. Light and Electron Optics127, 9885 (2016), IF: 0.742
  146. Nasar Ahmed, R. Ahmed, M. Rafique, M. A. Baig, “A Comparative Study of Cu-Ni Alloy using LIBS, LA-TOF, EDX and XRF”, Laser and Particle Beams, DOI: 10.1017/S0263034616000732, IF: 1.649
  147. Z. A Umar, R.S. Rawat, R. Ahmad, Z. Chen, Z Zhang, J Siddiqui, A Hussnain, T Hussain, M.A. Baig, “Structural, compositional and hardness properties of hydrogenated amorphous carbon nitride thin films synthesized by dense plasma focus device”, Surf. Interface Anal. (2016), DOI: 10.1002/sia.6192, IF: 1.018
  148. K. Khan, A. Zuberi, S. Nazir, “Effects of dietary selenium nanoparticles on physiological and biochemical aspects of juvenile Tor putitora”, Turkish Journal Of Zoology 40 (5), 704-712, 2016, IF: 0.880
  149. Faisal, F. Qamar, T. Mahmood, Z. A. Rehan, “The Photocatalytic Efficacy of TiO2 Polymorphs, P-25 and Hexagonal ZnO in Sunlight Exposure for Water Decontamination: A Comparison” Current Nanoscience 12 (5), 536-546, 2016, IF: 0.934
  150. N. Salah, A. Hameed, M. Aslam, “Flow controlled fabrication of N doped ZnO thin films and estimation of their performance for sunlight photocatalytic decontamination of water”Chemical Engineering Journal 291, 115-127, 2016, IF: 5.310
  151. A. Kausar, “Bucky Papers of Poly(Methyl Methacrylate-co-Methacrylic acid)/Polyamide 6 and Graphene Oxide-Montmorillonite’ Journal Of Dispersion Science And Technology 37 (1), 66-72, 2016, IF: 1.112
  152. Curcio, L. Omiciuolo, M. Pozzo, N. Jabeen, , “Molecular Lifting, Twisting, and Curling during Metal-Assisted Polycyclic Hydrocarbon Dehydrogenation”, Journal of The American Chemical Society 138 (10), 3395-3402, 2016, IF: 13.038
  153. Iqbal, Nousheen; Wang, Xianfeng; Yu, Jianyong, N. Jabeen “In situ synthesis of carbon nanotube doped metal-organic frameworks for CO2 capture” Rsc Advances 6(6), 4382-4386, 2016, IF: 3.289
  154. A. Kausar, I. Rafique, M. Bakhtiar, “Review of Applications of Polymer/Carbon Nanotubes and Epoxy/CNT Composites” Polymer-Plastics Technology And Engineering 55(11), 1167-1191, 2016., IF: 1.511
  155. N. Salah, A. Hameed, M. Aslam, “The performance of Zn1-xCexO nanoparticles thin films in sunlight exposure: synthesis, characterization and photocatalytic activity” Desalination And Water Treatment 57(53), 25581-25590, 2016, IF: 1.272
  156. Shahzad, M. I.; Giorcelli, M.; Ventola, L., N. shahzad “Convective Heat Transfer Enhancement for Electronic Device Applications Using Patterned MWCNTs Structures” Heat Transfer Engineering 37(9), 783-790, 2016, IF: 1.016
  157. Salah, Numan; Hameed, A.; Aslam, M., ” Photocatalytic activity of V doped ZnO nanoparticles thin films for the removal of 2-chlorophenol from the aquatic environment under natural sunlight exposure” Journal Of Environmental Management 177, 53-64, 2016, IF: 3.131
  158. Razzaq, Humaira; Saira, Farhat; Yaqub, Azra, “Interaction of gold nanoparticles with free radicals and their role in enhancing the scavenging activity of ascorbic acid” Journal Of Photochemistry And Photobiology B-Biology 161, 266-272, 2016, IF: 3.035
  159. S. Javaid, M. J. Akhtar, “Orientation dependant charge transfer at fullerene/Zn-phthalocyanine (C60/ZnPc) interface: Implications for energy level alignment and photovoltaic properties” Applied Physics Letters 109(5), 051605, 2016, IF: 3.142
  160. Gondal, A. Adeseda, S.G. Rashid, A. Hameed, “Facile synthesis, characterization and photocatalytic performance of Au-Ag alloy nanoparticles dispersed on graphitic carbon nitride under visible light irradiations” Journal Of Molecular Catalysis A-Chemical 423, 114-125, 2016, IF: 3.958
  161. Hussain, Shahzad; Hasanain, S. K, “Chemical pressure induced red shift in band gap and d-d transition energies in Sr doped BiFeO3” Journal Of Alloys And Compounds 688, 1151-1156 Part: A, 2016, IF: 3.014
  162. Al-Qasmi, Noha; Soomro, M. Tahir; Aslam, M., A. Hameed, “The efficacy of the ZnO:alpha-Fe2O3 composites modified carbon paste electrode for the sensitive electrochemical detection of loperamide: A detailed investigation” Journal Of Electroanalytical Chemistry 783, 112-124, 2016, IF: 2.822
  163. M. A. Uzair, A. Waqas, A. H. Khoja and N. Ahmad, “Experimental study of catalytic degradation of polypropylene by acid-activated clay and performance of Ni as a promoter” , Energy Sources Part A- Recovery Utilization and Environmental Effects, 38(24), 3618-3624, 2016, IF: 0.455
  164. R. Sattar, A. Kausar, I. Fakhar and M. Siddiq, “Shape Memory and Physical Properties of Composites of Polyethylene Oxide/Poly(propylene glycol)-block-Poly(ethylene glycol)block-poly(propylene glycol)/2,4-Toluene Diisocyanate, Polypyrrole and Modified MWCNT”, Polymer-Plastics Technology and Engineering (2016), DOI:10.1080/03602559.2015.1132436, IF: 1.511
  165. S. Nazir, “Smart Nickle Oxide based core-shell nanoparticles for combined chemo and photodynamic cancer therapy, Int. J. Nanomedicines, 2016, DOI: 10.2147/IJN.S106533, IF: 4.320
  166. A. Kausar, “Fuel cell membranes of phosphoric acid-doped poly(benzimidazole/ether/siloxane/amide)/sulfonated polystyrene/silica nanoparticle nanocomposites: A physical property study”, Journal Of Thermoplastic Composite Materials, 29 (5), 717-731, 2016, IF: 0.922
  167. A. Kausar, “Synthesis and properties of polyimide nanocomposites self-reinforced with electrospun poly(azo-naphthyl-imide)/carbon nanotube nanofibers”, journal Of Thermoplastic Composite Materials 29 (3), 312-326, 2016, IF: 0.922
  168. D. Giacomo, Francesco; Fakharuddin, Azhar; Jose, Rajan, “Progress, challenges and perspectives in flexible perovskite solar cells”, Energy & Environmental Science, 9 (10), 3007-3035, 2016 (Review), IF: 25.427
  169. N. Ali, A. Hussain, R. Ahmed, W. N. Wan Shamsuri, A. Shaari, N. Ahmad and S. M. Abbas, “Antimony sulphide, an absorber layer for solar cell application”, Applied Physics A: Materials science and processing 122 (1) 123-127 (2016), DOI: 10.1007/s00339-015-9542-0, IF: 1.444
  170. S. M. Abbas, R. Afrin, N. A. Shah, M.F. Mustafa, Z.Ali and N. Ahmad, “Effect of varying inert gas and acetylene concentration on the synthesis of carbon nanotubes”, Journal of Nanoscience & Nanotechnology, 16 (1) 2956-2959 (2016), DOI: 10.1166/jnn.2016.12469, IF: 1.338
  171. S. M. Abbas, Z. Rehman, U. A. Rana, S.D. Khan, Z. Iqbal and N. Ahmad, “MoN-decorated nitrogen doped carbon nanotubes anode with high lithium storage performance”, Electrochemica Acta190 (1) 988–996 (2016), DOI:10.1016/j.electacta.2015.12.147, IF: 4.803
  172. S. Hussain, S. Ali, S. Shahzadi, M. N. Tahir, M. Shahid, K. S. Munawar, S. M. Abbas, “Synthesis, spectroscopy, single crystal XRD and biological studies of multinuclear organotin dicarboxylates”, Polyhedron, (2016), DOI:10.1016/j.poly.2016.05.045, IF: 2.108
  173. M. A. Choudhary, Z. Ahmad, A. Hassan, Y. Khan, M. Aslem, “Synthesis and Characterization of ZnO/CuO nanocompsites on Porous 3D Ni Substrate and its Photo-electric behavior”, Synthesis and Reactivity in Inorganic Metal-Organic and Nano-Metal Chemistry (2016), DOI:10.1080/15533174.2015.1137034, IF: 0.493
  174. N. A. Khan, A. Saleem, Anees-ur-Rehman, M. Imran, A. A. Khrum, “Post deposition annealing: a route to bandgap tailoring of ZnSe thin films”, J Mater Sci: Mater Electron, DOI: 10.1007/s10854-016-5039-7, IF: 1.798
  175. H. S. Bhatti, D. H. Anjum, Shafiq Ullah, B. Ahmed, A. Habib, A. Karim and S. K. Hasanain, “Electrochemical Characteristics and Li+ Ion Intercalation Kinetics of Dual-Phase Li4Ti5O12/Li2TiO3 Composite in the Voltage Range 0–3 V” J. Phys. Chem. C, 120 (18), 9553–9561(2016), DOI: 10.1021/acs.jpcc.5b12114, IF: 4.509
  176. H. S. Bhatti, S. T. Hussain, F. A. Khan, S. Hussain, “Synthesis and induced multi ferroicity of perovskite PbTiO3; a review”, Applied Surface Science, 367, 291-306 (2016), DOI:10.1016/j.apsusc.2016.01.164 (Review), IF: 3.150
  177. S. Waseem, Kashif-Ur-Rehman, R. Kumar, T. Mahmood, “Hemozoin Enhances Maturation of Murine Bone Marrow Derived Macrophages and Myeloid Dendritic Cells”, Iran.J.Immunol,13 (2016), IF: 0.741
  178. M. Castellino, M. Rovere, M. I. Shahzad, A. Tagliaferro, “Conductivity in carbon nanotube polymer composites: a comparison between model and experiment”, Composites Part A, 87(2016) 237–242, IF: 3.719
  179. N. Shahzad, D. Pugliese, M. I. Shahzad and E. Tresso, “Real time monitoring of ultrafast sensitization for Dye-Sensitized Solar Cell photoanodes”, Solar Energy, 130 (2016) 74–80, IF: 3.685
  180. A. Kausar, “Waterborne Polyurethane Coated Polyamide/Fullerene Composite Films: Mechanical, Thermal and Flammability Properties”, International Journal of Polymer Analysis and Characterization, 21(4): 275-285 (2016) DOI:10.1080/1023666X.2016.1147729, IF: 1.515
  181. A. Kausar and M. Siddiq, “Polyurethane/Poly(ethylene-co-ethyl acrylate) and Functional Carbon Black-based Hybrids: Physical Properties and Shape Memory Behavior”, Journal of Applied Polymer Science, 132: 43481 (2016), DOI: 10.1002/app.43481, IF: 1.866
  182. A. Kausar and A U. Rahman, “Effect of Graphene Nanoplatelet Addition on Properties of Thermo-responsive Shape memory Polyurethane-based Nanocomposite”, Fullerenes, Nanotubes and Carbon Nanostructures, 24(4): 235-242 (2016), DOI:10.1080/1536383X.2016.1144592, IF: 0.812
  183. A. Kausar, “ Enhanced Electrical and Thermal Conductivity of Modified Poly(acrylonitrile-co-butadiene)-based Nanofluid Containing Functional Carbon BlackGraphene Oxide”, Fullerenes, Nanotubes and Carbon Nanostructures (2016); 24(4): 278-285, DOI: 10.1080/1536383X.2016.1153467, IF: 0.812
  184. A. Kausar, “Nanodiamond Tethered Epoxy/Polyurethane Interpenetrating Network Nanocomposite: Physical Properties and Thermo-responsive Shape Memory Behavior” International Journal of Polymer Analysis and Characterization (2016), 21(4): 348-358, DOI: 10.1080/1023666X.2016.1156911, IF: 1.515
  185. S. Haider, A. Kausar, and B. Muhammad, “Overview of Various Sorts of Polymer Nanocomposite Reinforced with Layered Silicate”, Polymer-Plastics Technology and Engineering (2016), 55(7): 723-743, DOI: 10.1080/03602559.2015.1098701, IF: 1.511
  186. A. Kausar, I. Rafique, and B. Muhammad, “A Review on Applications of Polymer/Carbon nanotube and Epoxy/CNT Composites”, Polymer-Plastics Technology and Engineering (2016), DOI: 10.1080/03602559.2016.1163588, IF: 1.511
  187. A. Kausar, Z. Anwar, and B. Muhammad, “Recent Developments in Epoxy/Graphite, Epoxy/Graphene and Epoxy/Graphene Nanoplatelet Composites: A Comparative Review”, Polymer-Plastics Technology and Engineering (2016), DOI: 10.1080/03602559.2016.1163589, IF: 1.511
  188. A. Kausar, I. Rafique, Z. Anwar, and B. Muhammad, “Recent Developments in Different Types of Flame Retardant and Effect on Fire Retardancy of Epoxy Composite”, Polymer-Plastics Technology and Engineering (2016), DOI: 10.1080/03602559.2016.1163607, IF: 1.511
  189. S. Gul, A. Kausar, and B. Muhammad, “Research Progress on Properties and Applications of Polymer/Clay Nanocomposite”, Polymer-Plastics Technology and Engineering (2016), 55(7): 684-703, DOI: 10.1080/03602559.2015.1098699, IF: 1.511
  190. Z. Akram, A. Kausar, and M. Siddiq, “Review on Polymer/Carbon Nanotube Composite Focusing Polystyrene Microsphere and Polystyrene Microsphere/Modified CNT Composite: Preparation, Properties and Significance”, Polymer-Plastics Technology and Engineering (2016), 55(6): 582-603, DOI: 10.1080/03602559.2015.1098696, IF: 1.511 (Review)
  191. Naz, A. Kausar, and M. Siddiq, “Influence of Graphite Filler on Physicochemical Characteristics of Polymer/Graphite Composites: A Review”, Polymer-Plastics Technology and Engineering (2016), 55(6): 604-625, DOI: 10.1080/03602559.2015.1098697, IF: 1.511 (Review)
  192. A. Kausar and M. Siddiq, “Poly (ether-imide)/Polyurethane Foams Reinforced with Graphene Nanoplatelet: Microstructure, Thermal stability, and Flame Resistance” International Journal of Polymer Analysis and Characterization (2016), DOI: 10.1080/1023666X.2016.1168106, IF: 1.515
  193. N. Ahmad, A. Kausar and B. Muhammad, “Structure and Properties of 4-Aminobenzoic acid Modified Polyvinyl chloride and Functionalized Graphite-based Membranes”, Fullerenes, Nanotubes and Carbon Nanostructures (2016), 24(2): 75-87, DOI: 10.1080/1536383X.2015.1118620, IF: 0.812
  194. S. Jabeen, S. Saeed, A. Kausar, B. Muhammad, S. Gul and M. Farooq, “Influence of Chitosan and Epoxy Cross linking on Physical Properties of Binary Blends”, International Journal of Polymer Analysis and Characterization (2016), 21(2): 163-174, DOI:10.1080/1023666X.2016.1131404, IF: 1.515
  195. F. Khan, A. Kausar and M. Siddiq, “Buckypapers of 4,4¬-oxydianiline-modified polyvinylchloride and functional nano-filler obtained by resin infusion method”, Iranian Polymer Journal (2016), 25: 213-228, DOI: 10.1007/s13726-016-0415-y, IF: 1.684
  196. D. M. Khan, A. Kausar, and S. M. Salman, “Exploitation of Nanobifiller in Polymer/Graphene oxide-Carbon nanotube, Polymer/Graphene oxide-Nanodiamond and Polymer/Graphene oxide-Montmorillonite Composite: A Review”, Polymer-Plastics Technology and Engineering (2016), 55(7): 744-768, DOI: 10.1080/03602559.2015.1103266, IF: 1.511
  197. S. Meer, A. Kausar, and T. Iqbal, “Attributes of Polymer and Silica Nanoparticle Composites: A Review”, Polymer-Plastic Technology and Engineering (2016), 55(8): 826-861, DOI:10.1080/03602559.2015.1103267, IF: 1.511
  198. D. M. Khan, A. Kausar, and S. M. Salman, “Fabrication and Characterization of Polyvinyl chloride/Poly(styrene-co-maleic anhydride) Intercalated Functional Nanobifiller-based Composite Paper”, International Journal of Polymer Analysis and Characterization (2016), 21(3):228-243, DOI:10.1080/1023666X.2016.1139295, IF: 1.515
  199. A. Kausar, “Thermal and Rheological Properties of Waterborne Polyurethane / Nanodiamond Composite”, Nanoscience and Nanotechnology (2016), 6(1): 6-10, IF: 1.338
  200. S. Gul, A. Kausar, S. Saeed, B. Muhammad, S. Jabeen, and M. Farooq, “A Study on Physical Properties of Melt Blended Acrylonitrile Butadiene Styrene/Ethylene Vinyl Acetate Plasticized with Linear Low Density Polyethylene and Montmorillonite”, Polymer-Plastics Technology and Engineering (2016), DOI: 10.1080/03602559.2015.1132456, IF: 1.511
  201. D. M. Khan, A. Kausar, and S. M. Salman, “Buckypapers of Polyvinyl chloride/Poly(styrene-co-maleic anhydride) Blend Intercalated Graphene oxide-Carbon nanotube Nanobifiller: Physical Property Exploration”, Fullerenes, Nanotubes and Carbon Nanostructures (2016), 24(3): 202-212, DOI: 10.1080/1536383X.2016.1138105, IF: 0.812
  202. R. Sattar, A. Kausar, and M. Siddiq, “Influence of conducting polymer on mechanical, thermal, electrical and shape properties of polyurethane/polythiophene blends and nanocomposites”, Advanced Materials Letters 2016), 7(4): 282-288, DOI: 10.5185/amlett.2016.6198, IF: 1.46
  203. Rafique, A. Kausar, and B. Muhammad, “Epoxy Resin Composite Reinforced with Carbon Fiber and Inorganic Filler: Overview on Preparation and Properties”, Polymer Plastics Technology and Engineering (2016), DOI:10.1080/03602559.2016.1163597, IF: 1.511
  204. Z. Anwar, A. Kausar and B. Muhammad, “Polymer and Graphite-derived Nanofiller Composite: An Overview of Functional Applications” Polymer-Plastics Technology and Engineering (2016), DOI: 10.1080/03602559.2016.1163598, IF: 1.511
  205. S. Gul, A. Kausar, B. Muhammad and S. Jabeen, “Technical Relevance of Epoxy/Clay Nanocomposite with Organically Modified Montmorillonite: A Review”, Polymer-Plastics Technology and Engineering (2016), DOI: 10.1080/03602559.2016.1163593, IF: 1.511 (Review)
  206. N. Ahmad, A. Kausar and B. Muhammad, “Perspectives on Polyvinyl chloride and Carbon Nanofiller Composite: A Review”, Polymer-Plastics Technology and Engineering (2016), DOI: 10.1080/03602559.2016.1163587, IF: 1.511
  207. S. Haider, A. Kausar and B. Muhammad, “Research Advancement in High-Performance Polyamides and Polyamide Blends Loaded with Layered Silicate”, Polymer-Plastics Technology and Engineering (2016), DOI: 10.1080/03602559.2016.1163602, IF: 1.511
  208. S. Meer, A. Kausar and T. Iqbal, “Trends in Conducting Polymer and Hybrids of Conducting Polymer/Carbon Nanotube: A Review” Polymer-Plastics Technology and Engineering (2016), DOI: 10.1080/03602559.2016.1163601 (Review), IF: 1.511
  209. S. M. Abbas, N. Ahmad, Ata-ur-Rehman, U. A. Rana, S. Khan, “High Rate Capability and Long Cycle Stability of Cr2O3 Anode with CNT for Lithium Ion Batteries”, Electrochemica Acta Volume: 212 Pages: 260-269 Published: SEP 10 2016, IF: 4.803
  210. S. Nazir, “Annihilation of Leishmania by daylight responsive ZnO nanoparticles: A temporal relationship of ROS induced lipid and protein oxidation”, Int. J. Nanomedicines, 2016, IF: 4.320
  211. S. Nazir, T. Mahmood, “Microwave assisted green synthesis of superparamagnetic nanoparticles using fruits peel extracts: Surface engineering, T2 Relaxometry and Photodynamic treatment Potential”, Int. J. Nanomedicines, Volume: 11 Pages: 3833-3848, 2016, IF: 4.320
  212. N. Younas, A. Zuberi, T. Mahmood, W. Akhtar, “Improved efficiency of Nanoform of chitosan: Growth promoting and immunomodulatory effects on Silver carp (Hypophthaimichthys molitrix)”, Animal feed, Science & Technology, 2016, IF: 1.713
  213. S. A. Shah, M.U. A. Khan, M. Arshad, S.U. Awan, M.U. Hashmi, and N. Ahmad, “Doxorubicin-loaded photosensitive magnetic liposomes for multi-modal cancer therapy”, Colloids and Surfaces B: Biointerfaces 148, 157–164, 2016, IF 3.902
  214. G. Iqbal, A. Iqbal, A. Mahboob, S. Mehpara, F. T. Ahmed, “Memory enhancing effect of Black Pepper in the AlCl3-induced neurotoxicity mouse model is mediated through its active component Chavicine”, Current Pharmaceutical Biotechnology, 17(11), 962-973, 2016, IF: 1.802
  215. Ali, S. K. Hasanain, T. Ali, M. Sultan, “Improvement of antimony sulfide photo absorber performance by interface modification in Sb2S3–ZnO hybrid nanostructures”, Physica E: Low-dimensional Systems and Nanostructures 87, 20-26. DOI: http://dx.doi.org/10.1016/j.physe.2016.11.002, IF: 1.904
  216. J. Nisar, M. A. Khan, M. Iqbal, A. Shah, R. A. Khan, M. Sayed, T. Mahmood, “Comparative study of Kinetics of the thermal decomposition of polypropylene using different methods”, Advances in Polymer Technology 21776(1 of 8), 2016 , DOI: 10.1002/adv.21776, IF: 1.114
  217. A. Kausar, “An Investigation on Epoxy/Poly(urethane-amide)-based Interpenetrating Polymer Network Reinforced with An Organic Nanoparticle”, Materials Research Innovations (2016); DOI:10.1080/14328917.2016.1265232, IF: 0.830
  218. A. Kausar, “Adhesion, Morphology and Heat Resistance Properties of Polyurethane Coated Poly (methyl methacylate)/Fullerene-C60 Composite Films”, Composite Interfaces 2016; DOI:10.1080/09276440.2017.1257251, IF: 1.046
  219. A. Kausar, “Scientific Potential of Chitosan Blending with Different Polymeric Materials: A Review”, Journal of Plastic Film and Sheeting 2016; DOI: 10.1177/8756087916679691, IF: 0.850
  220. A. Kausar, “Carbon Nano Onion as Versatile Contender in Polymer Compositing and Advance Application”. Fullerenes, Nanotubes and Carbon Nanostructures 25(2), 109-123 (2016), DOI:10.1080/1536383X.2016.1265513, IF: 0.812
  221. A. Kausar, “Poly (urethane-urea)/Polythiophene/Carbon black Composite: Morphology, Mechanical and Conducting Shape Memory Behavior”, Journal of Thermoplastic Composite Materials 2016; DOI: 10.1177/0892705716679477, IF: 0.922
  222. A. Kausar, “Investigation on Nanocomposite Membrane of Multi-walled Carbon nanotube Reinforced Polycarbonate Blend for Gas Separation”, Journal of Nanomaterials 2016, 7089530, 9, DOI:10.1155/2016/7089530, IF: 1.758
  223. A. Kausar, “Survey on Langmuir-Blodgett Films of Polymer and Polymeric Composite”, Polymer-Plastics Technology and Engineering 2016; DOI:10.1080/03602559.2016.1247282. IF: 1.511
  224. A. Kausar, “Self-Assembled Tri-block Terpolymer Blend Membranes Reinforced with Poly(methyl methacrylate) Coated Gold Nanoparticles Obtained via Phase Inversion Technique”, International Journal of Polymer Analysis and Characterization 21(7), 606-616 (2016); DOI:10.1080/1023666X.2016.1192325, IF: 1.515
  225. A. Kausar, “Synthesis and Properties of Novel Polystyrene/Polyurea and Functional Graphene-based Nanocomposite Foams”, Journal of Cellular Plastics 0(0), 1–14 (2016), DOI: 10.1177/0021955X16652104, IF: 2.057
  226. Meer S, A. Kausar, and Iqbal T. “Synthesis of Multi-walled Carbon nanotube/Silica Nanoparticle/Polystyrene Microsphere/Polyaniline based Hybrids for EMI Shielding Application”, Fullerenes, Nanotubes and Carbon Nanostructures 24(8), (2016), DOI: 10.1080/1536383X.2016.1195816, IF: 0.812
  227. A. Kausar, “A Study on Poly (imide-ethylene glycol) and Graphene Oxide-based Hybrid Proton Exchange Membrane”, International Journal of Polymer Analysis and Characterization 21(6), 537-547, (2016), DOI: 10.1080/1023666X.2016.1177347, IF: 1.515
  228. A. Kausar, “Estimation of Thermo-Mechanical and Fire Resistance Profile of Epoxy Coated Polyurethane/Fullerene Composite Films”, Fullerenes, Nanotubes and Carbon Nanostructures 24(6), 391-399, (2016), DOI: 10.1080/1536383X.2016.1172067, IF: 0.812
  229. Rafique I, A. Kausar, and Muhammad B., "Composite of DGEBA/TBA Epoxy Blend and Amine-Functionalized Carbon Nanotube: Structural, Thermal, Non-Flammability, and EMI Shielding Studies”, Fullerenes, Nanotubes and Carbon Nanostructures 24(9), 564-576, (2016), DOI: 10.1080/1536383X.2016.1205588, IF: 0.812
  230. A. Kausar, “Thermal Conductivity Measurement of Polyvinylpyrrolidone/ Polyethylene/Graphene Nanocomposite”, Nanoscience and Nanotechnology 2016; 6(2): 34-37 (DOI:10.5923/j.nn.20160602.03), IF: 1.338
  231. Shah R, A. Kausar, and Muhammad B., “Investigation on Thermal Conductivity and Physical Properties of Polythiophene/p-Phenylenediamine-Graphene Oxide and Polythiophene-co-Poly(methyl methacrylate)/p-Phenylenediamine Graphene oxide Composites”, Composite Interfaces 23(9), 887-899, (2016), DOI:10.1080/09276440.2016.1175198, IF: 1.046
  232. Afzal A, A. Kausar, and Siddiq M., “Perspectives of Polystyrene Composite with Fullerene, Carbon black, Graphene and Carbon nanotube: A Review”, Polymer-Plastics Technology and Engineering 55(18), 1988-2011 (2016), DOI:10.1080/03602559.2016.1185632., IF: 1.511
  233. Gul S, A. Kausar, Mehmood M, Muhammad B, Jabeen S., “Progress on Epoxy/Polyamide and Inorganic Nanofiller-based Hybrids: Introduction, Application and Future Potential”, Polymer-Plastics Technology and Engineering 55(17),1842-1862 (2016), DOI: 10.1080/03602559.2016.1185628, IF: 1.511
  234. Begum S, A. Kausar, Hameed Ullah and Siddiq M., “Potential of Polyvinylidene flouride/Carbon nanotube Composite in Energy, Electronics and Membrane Technology: An Overview”, Polymer-Plastics Technology and Engineering 55(18),1949-1970 (2016), DOI: 10.1080/03602559.2016.1185630, IF: 1.511
  235. S. T. Muntha, A. Kausar, and Siddiq M., “A Review on Zeolite Reinforced Polymeric Membranes: Salient Features and Applications”, Polymer-Plastics Technology and Engineering 55(18), 1971-1987(2016), DOI: 10.1080/03602559.2016.1185631, IF: 1.511
  236. Akram Z, A. Kausar, and Siddiq M., “Scrutinization of Polystyrene Microsphere-grafted-Multi-walled Carbon nanotube and Silver Nanoparticle-based Hybrids: Morphology, Thermal Properties and Antibacterial Activity”, Polymer-Plastics Technology and Engineering 2016; 56(2): 202-215 (DOI:10.1080/03602559.2016.1211692), IF: 1.511
  237. A. Kausar, Meer S, and Iqbal T., “Structure, Morphology, Thermal, and Electro-magnetic Shielding Properties of Polystyrene Microsphere/Polyaniline/Multi-walled Carbon Nanotube Nano-composite”, Journal of Plastic Film and Sheeting 0(0) 1–28 (2016), DOI: 10.1177/8756087916663813, IF: 0.850
  238. A. Kausar, “Novel Polyamide Nanocomposite with Montmorillonite Clay and Gold nanoparticle Nanofillers”, Nanoscience and Nanotechnology 6(3), 43-47 (2016), DOI: 10.5923/j.nn.20160603.02), IF: 1.338
  239. S. T. Muntha, A. Kausar, and Siddiq M., “Progress in Applications of Polymer-Based Membranes in Gas Separation Technology”, Polymer-Plastics Technology and Engineering 55(12), 1282-1298 (2016), DOI: 10.1080/03602559.2016.1163592, IF: 1.511
  240. Afzal A, A. Kausar, and Siddiq M., “A Review on Polymer/Cement Composite with Carbon nanofiller and Inorganic Filler”, Polymer-Plastics Technology and Engineering 55(12), 1299-1323, (2016), DOI:10.1080/03602559.2016.1163594, IF: 1.511
  241. Afzal A, A. Kausar, and Siddiq M., “Technical Relevance of Polymer/Cement/Carbon nanotube Composite: Opportunities and Challenges”, Polymer-Plastics Technology and Engineering 55(16), 1743-1764 (2016), DOI:10.1080/03602559.2016.1163608, IF: 1.511
  242. A. Kausar, “Physical Properties and Shape Memory Behavior of Thermoplastic Polyurethane/Poly(ethylene-alt-maleic anhydride) blends and Graphene Nanoplatelet Composite”, Iranian Polymer Journal 2016; 25(11), 945-955 (DOI: 10.1007/s13726-016-0481-1), IF: 1.684
  243. A. Kausar, Rafique I, and Muhammad B., “Significance of Carbon nanotube in Flame Retardant Polymer/CNT Composite: A Review”, Polymer-Plastics Technology and Engineering 56 (5), 470-487 (2016), DOI: 10.1080/03602559.2016.1233267, IF: 1.511
  244. A. Kausar, Rafique I, and Muhammad B., “Electromagnetic Interference Shielding of Polymer/Nanodiamond, Polymer/Carbon nanotube, and Polymer/Nanodiamond-Carbon nanotube Nano-bifiller Composite: A Review”, Polymer-Plastics Technology and Engineering 56:4, 347-363 (2016), DOI:10.1080/03602559.2016.1233273, IF: 1.511
  245. Rafique I, A. Kausar, and Muhammad B., “Fabrication and Characterization of High Performance Diglycidyl Ether of Bisphenol-A/Tetrabromobisphenol-A Blend Reinforced with Multi-walled Carbon nanotube Composite”, Polymer-Plastics Technology and Engineering 56:3, 321-333 (2016), DOI: 10.1080/03602559.2016.1233255, IF: 1.511
  246. A. Kausar, Anwar Z, and Muhammad B., “An Overview of Non-flammability Characteristics of Graphene and Graphene Oxide-based Polymeric Composite and Essential Flame Retardancy Techniques”, Polymer-Plastics Technology and Engineering 56(5), 488-505, (2016), DOI: 10.1080/03602559.2016.1233274, IF: 1.511
  247. A. Kausar, “Advances in Polymer/Fullerene Nanocomposite: A Review on Essential Features and Applications”, Polymer-Plastics Technology and Engineering 56(6), 594-605 (2016), DOI:10.1080/03602559.2016.1233278, IF: 1.511
  248. A. Kausar, “Review on Technological Significance of Photoactive, Electroactive, pH Sensitive, Water-active, and Thermo-Responsive Polyurethane Materials”, Polymer-Plastics Technology and Engineering 56(6), 606-616 (2016), DOI:10.1080/03602559.2016.1233279, IF: 1.511
  249. S. T. Muntha, A. Kausar, and Siddiq M., “Advances in Polymeric Nano-filtration Membrane: A Review”, Polymer-Plastics Technology and Engineering 2016; DOI:10.1080/03602559.2016.1233562, IF: 1.511
  250. Haider S, A. Kausar, and Muhammad B., “Overview on Polystyrene/Nanoclay Composite: Physical Properties and Application”, Polymer-Plastics Technology and Engineering 2016; DOI:10.1080/03602559.2016.1233563, IF: 1.511
  251. Afzal A, A. Kausar, and Siddiq M., “A Review Highlighting Physical Prospects of Styrenic Polymer and Styrenic Block Copolymer Reinforced with Carbon nanotube”, Polymer-Plastics Technology and Engineering 56(6), 573-593 (2016), DOI:10.1080/03602559.2016.1233276, IF: 1.511
  252. S. T. Muntha, A. Kausar, and Siddiq M., “Functional Polymeric Membrane Containing Inorganic Nanoparticle: Recent Advances and Applications”, Polymer-Plastics Technology and Engineering 2016; DOI:10.1080/03602559.2016.1233275, IF: 1.511
  253. Khan D M, A. Kausar, and Saeed A., “Research Advancement Towards Polymer/Nanodiamond Composite in Buckypaper: A Review”, Polymer-Plastics Technology and Engineering 2016; DOI:10.1080/03602559.2016.1247283, IF: 1.511
  254. K. S. Munawar, S. Ali, N. Khalid, M. N. Tahir, S. M. Abbas, “Vanadium-catalyzed esterification of carboxylates: synthesis, X-Ray crystal structure and biological studies”, Chemistry Journal, 6(1), 1-9 (2016)
  255. A. Kausar, “Rheology and Mechanical Studies on Polystyrene/Polyethylene-graft-maleic anhydride blend and Cellulose-Clay based Hybrid”, International Journal of Composite Materials 2016; 6(3): 63-67, DOI:10.5923/j.cmaterials.20160603.01
  256. A. Kausar, “Composite of Triglycidyl para-amino phenol, Polystyrene and [3-(2-aminoethylamino)propyl] trimethoxysilane-Modified Graphite”, International Journal of Composite Materials 2016; 6(6):167-171.
  257. A. Kausar and Ahmad N., “Topical Progression in Organic and Inorganic Membranes for Advance Application: A Review”, American Journal of Polymer Science & Engineering 2016; 4: 60-81.
  258. A. Kausar, “Review on Structure, Properties, and Appliance of Essential Conjugated Polymers”, American Journal of Polymer Science & Engineering 2016; 4(1): 91-102.
  259. A. Kausar, “Performance of Epoxy and Nanodiamond Exfoliated Montmorillonite Nanocomposite”, International Journal of Aerospace Sciences 2016; 4(1): 9-13 (DOI: 10.5923/j.aerospace.20160401.02).
  260. A. Kausar, “Design of Polydimethylsiloxane/Nylon 6/Nanodiamond for Sensor Application”, International Journal of Instrumentation Science 2016; 5(1): 15-18 (DOI: 10.5923/j.instrument.20160501.03).
  261. A. Kausar, “Development of Non-flammable Poly[(o-cresyl glycidyl ether)-co-formaldehyde] System with Poly(ethylene glycol) bis(amine) and Bis(4-trifluoromethylphenyl)phosphine”, International Journal of Composite Materials 2016; 6(4): 129-132, DOI: 10.5923/j.cmaterials.20160604.05
  262. Anwar Z, A. Kausar, Khan LA, and Muhammad B., “Modified Graphene Nanoplatelet and Epoxy/Block Copolymer-based Nanocomposite: Physical Characteristic and EMI Shielding Studies”, Nanocomposites 2(3), 141-151 (2016), DOI: 10.1080/20550324.2016.1236535
  263. Jabeen S, A. Kausar, Saeed S, Muhammad B, Gul S and Farooq M., “Crosslinking of Alginic Acid/Chitosan Matrices Using Bis Phenol-F-Diglycidyl Ether: Mechanical, Thermal and Water absorption investigation”, International Journal of Plastics Technology 2016; 20(1):159–174 , DOI: 10.1007/s12588-016-9143-6
  264. A. Kausar, “Enhancement of Electrical and Mechanical Properties of Polycarbonate/Poly(ethylene oxide) and Carbon Black Composite”, American Journal of Current Organic Chemistry 2016; 2(1): 1-9.
  265. A. Kausar, “Scrutinization of Poly(ethylene-co-ethyl acrylate)/Poly(methyl acrylate) and Zein-based Nanocomposite”, American Journal of Polymer Science & Engineering 2016; 4(1): 1-7.
  266. Jabeen S, A. Kausar, Saeed S, Muhammad B, Gul S and Farooq M., “Poly(vinyl alcohol) and Chitosan Blend Cross-linked with Bis Phenol-F-Diglycidyl Ether: Mechanical, Thermal and Water Absorption Investigation”, Journal of the Chinese Advanced Materials Society 55(18), 1988–2011 (2016), DOI:10.1080/22243682.2016.1192958.
  267. A. Kausar, “Composite of poly [(phenyl glycidyl ether)-co-formaldehyde] with Cement and Graphite-Cement”, International Journal of Materials and Chemistry (2016), 6(1): 1-5, DOI: 10.5923/j.ijmc.20160601.01
  268. A. Kausar, “Electromagnetic Interference Shielding of Polyaniline/Poloxalene/Carbon Black Composite”, International Journal of Materials and Chemistry (2016), 6(1): 6-11
  269. A. Kausar, “Properties of Polyacrylamide and Functional Multi-walled Carbon nanotube Composite” American Journal of Nanoscience and Nanotechnology Research (2016), 4(1): 1-8.
  270. H. Razzaq, H. Nawaz, A. Siddiqa, M. Siddiq and S. Qaisar, “A brief review on nanocomposites based on PVDF with nanostructured TiO2 as filler”, Madridge J Nano Tec. Sci. 1 (1), 29-35.
  271. A. Kausar, “Poly (vinylacetate) cyanomethyl diphenylcarbamodthioate/Poly (vinyl acetate)/Carbon black Composite-based Sensor”, International Journal of Instrumentation Science 2016; 5(2): 19-23
  272. A. Kausar, “Poly (acrylonitrile-co-butadiene-co-styrene)/Fly ash/Halloysite Nanotube Composites: A Study on Physical Propertiesand Performance in Fuels”, International Journal of Plastics Technology 2016; 20(1):57–66, DOI: 10.1007/s12588-016-9133-8
  273. S. Hashmi, S. Gohar, T. Mahmood, U. Nawaz, H. Farooqi, “Biodiesel Production by using CaO-Al2O3 Nano Catalyst”, Int. J. Engin.Res. Sci. 2(3), 43-49(2016)
  274. A. Kausar, “Effect of Nanofiller Dispersion on Morphology, Mechanical and Conducting Properties of Electroactive Shape Memory Poly(urethane-urea)/Functional Nanodiamond Composite”, Advances in Materials Science 15(4): 14-28, (2016), DOI: 10.1515/adms-2015-0019
  275. A. Kausar, “Synthesis and Electrical Property of Polythiophene/Sol-gel Silver Nanoparticle-based Polyethylene Composite”, International Journal of Composite Materials 6(2): 43-47, (2016)
  276. M Adnan, S. Mahmood, A. Qamar, “Small amplitude Kinetic Alfven waves in a superthermal electron-positron-ion plasma” Advances In Space Research 58(9), 1746-1754, 2016, IF: 1.409
  277. Fayyazuddin, “Lepton flavor violating decays of mu and tau leptons in a gauge group SU(2)(L) x SU(2)(R) x SU(2)(Y)” International Jourmal of Moderm Physics A, 31 (16) 1650094, 2016, IF: 1.799
  278. Munir, Faisal; Ishaq, Saadi; Ahmed, Ishtiaq, “Polarized forward-backward asymmetries of the lepton pair in B -> K(1)l (+)l(-) decay in the presence of the new physics”, Progress of Theoretical And Experimental Physics, 1, 013B02, 2016, IF: 1.889
  279. A. Ahmad and W. Masood, "Nonlinear density excitations in a magnetorotating relativistic plasma with warm ions and non-Maxwellian electrons", Phys. Plasmas 23, 052102 (2016), IF: 2.207
  280. M. Irfan, S. Ali, and A. M. Mirza, "Magnetoacoustic solitons and shocks in dense astrophysical plasmas with relativistic degenerate electrons", Journal of Plasma Physics 82, 905820106 (2016), IF: 0.981
  281. M. K. Ayub , S. Ali, and M. Ikram, "Electrostatic twisted modes in multi-component dusty plasmas", Phys. Plasmas 23, 013702 (2016), IF: 2.207
  282. S. Ali, "Potential distribution around a test charge in a positive dust-electron plasma", Frontiers of Physics 11, 115201(2016), IF: 2.462
  283. S. Ali, S. Bukhari, and J. T. Mendonca, "Twisted Landau damping rates in multi-component dusty plasmas", Phys. Plasmas 23, 033703 (2016), IF: 2.207
  284. S. Khan, Ata-ur-Rehman, S. Ali, M. Khalid, N. A. D. Khattak and A. Zeb, "Parametric study of nonplanar dust acoustic solitons in two dimensional superthermal dusty plasmas", Contrib. Plasma Phys. 1-11, (2016), DOI:10.1002/ctpp.201600016, IF: 1.255
  285. S. U. Khan, M. Adnan, A. Qamar, and S. Mahmood, "Small amplitude two dimensional electrostatic excitations in a magnetized dusty plasma with q-distributed electrons", Astrophys. Space Sci 361(2016), 213, IF: 1.678
  286. U. Zakir, M. Adnan, Q. Haque, A. Qamar, and A. M. Mirza, "Ion temperature gradient mode driven solitons and shocks", Phys. Plasmas 23(2016), 042104, IF: 2.207
  287. T. Aziz, W. Masood, M. N. S. Qureshi, H. A. Shah, and P. H. Yoon, "Linear and nonlinear coupling of electromagnetic and electrostatic fluctuations with one dimensional trapping of electrons using product bi (r,q) distribution", Phys. Plasmas 23(2016), 062307, IF: 2.207
  288. Gul-e- Ali, W. Masood, and A. M. Mirza, "Nonlinear vortex structures with perpendicular shear flow, hot ions, and nonthermal distribution of electrons", Phys. Plasmas 23(2016), 022302, IF: 2.207
  289. S. A Khan, Bakhtiar-Ud-Din, M. Ilyas, Z. Wazir, “Ion waves driven by shear flow in a relativistic degenerate astrophysical plasma”, Pramana 86 (2016), 1143–1151, IF: 0.692
  290. S. A. Khan, Z. Iqbal, Z. Wazir, Aman-ur-Rehman, “Quantum Ion-Acoustic Oscillations in Single-Walled Carbon Nanotubes” Zeitschrift für Naturforschung A 71 (2016), 397-404, IF: 0.886
  291. S. Javaid, M.J. Akhtar, “Adsorption and electronic properties of Fullerene/Zn-Phthalocyanine (C60/ZnPc) interface with face-on orientation: A van der Waals corrected Density Functional Theory investigation”, Chemical Physics Letters 649 (2016), 73–77, IF: 1.860
  292. P. Arnold, H. C. Chang and S. Iqbal, “The LPM effect in sequential bremsstrahlung 2: factorization”, JHEP 09, 078 (2016), IF: 6.023
  293. P. Arnold, H.-C. Chang and S. Iqbal, “The LPM effect in sequential bremsstrahlung: dimensional regularization”, JHEP 10, 100 (2016), IF: 6.023
  294. P. Arnold, H. C. Chang and S. Iqbal “The LPM effect in sequential bremsstrahlung: 4-gluon vertices”, JHEP 10, 124 (2016), IF: 6.023
  295. N. Batool, W. Masood, M. Siddiq, and R. Jahangir, “Exact solution of CKP equation and formation and interaction of two solitons in pair ion-electron plasma, Physics of Plasmas, 23, 082306 (2016), IF: 2.207
  296. R. Jahangir, W. Masood, M. Siddiq, and N. Batool, “Interaction of solitons for obliquely propagating magnetoacoustic waves in stellar atmosphere”, Physics of Plasmas, 23, 122301 (2016). , DOI: 10.1063/1.4971219, IF: 2.207
  297. W. Masood, S. Zahoor, Gul-e-Ali, and A. Ahmad, “Existence regimes for the formation of nonlinear dissipative structures in inhomogeneous magnetoplasmas with non-Maxwellian electrons”, Physics of Plasmas, 23, 092104 (2016), IF: 2.207
  298. Muzzamal I. Shaukat, W. Masood, H. A. Shah, M. J. Iqbal, and A. M. Mirza “Finite amplitude nonlinear drift waves in a spatially inhomogeneous degenerate plasma with Landau quantization and electron temperature corrections”, Physics of Plasmas, 23, 102310 (2016), IF: 2.207
  299. H. Saleem, S. Ali, U. Saeed and Q. Huque, “Ion-acoustic solitons and vortices in the e-p-i plasma with field-aligned inhomogeneous flow”, Phys. Plasmas 23, 092117 (2016), IF: 2.207
  300. Aman-ur-Rehman, S. Ali, S. A. Khan and K. Shahzad, “Twisted electron-acoustic waves in plasmas”, Phys. Plasmas 23, 082122 (2016), IF: 2.207
  301. S. A. Khan and M. Ikram, “Electrostatic excitations in carbon nanotubes including many- electron effects”, J. Korean Phys. Soc. 69. 975 (2016), IF: 0.445
  302. H. Saleem and U. Saeed, “Low frequency limit of X-mode in non-uniform space and bounded laboratory plasmas”, Phys. Plasmas, 23, 092116 (2016), IF: 2.207
  303. A. Ali, Ishtiaq Ahmed, M. J. Aslam and Abdur Rehman, “Heavy quark symmetry and weak decays of the b baryons in pentaquarks with a cc ̅ component” Phys. Rev. D 94, 054001 (2016), IF: 4.506
  304. S. Parveen, S. Mahmood, M. Adnan and A. Qamar, “Characteristic study of head-on collision of dust-ion acoustic solitons of opposite polarity with kappa distributed electrons”, Phys. Plasmas 23, 092122 (2016), IF: 2.207
  305. S. A. Khan, Atsushi Fukuyama, Hiroe Igami and Hiroshi Idei, “Kinetic Full Wave Analysis Of Electron Cyclotron Wave Mode Conversion In Tokamak Plasmas”, Plasma and Fusion Res. 11(2016), 2403070, DOI: 10.1585/pfr.11.2403070
  306. Bari, Bushra; Lee, Jinhwan; Jang, Taehee, M. K. Alamgir, “Simple hydrothermal synthesis of very-long and thin silver nanowires and their application in high quality transparent electrodes” Journal of Materials Chemistry A 4(29), 11365-11371, 2016, IF: 8.262
  307. Q. Maqbool, M. Nazar, S. Naz, T. Hussain, N. Jabeen, R. Kausar, S. Anwaar, F. Abbas, T. Jan, “Antimicrobial potential of green synthesized CeO2 nanoparticles from Olea europaea leaf extract”, International Journal of Nanomedicine 11, 5015-5025 (2016), IF: 4.320
  308. R. Kausar, M. A. Shaheen, Q. Maqbool, S. Naz, M. Nazar, F. Abbas, T. Hussain, U. Younas, M. F. Shams, “Facile biosynthesis of Ag-NPs using Otostegia limbata plant extract: Physical characterization and auspicious biological activities”, AIP Advances 6, 095203 (2016), doi 10.1063/1.4962660, IF: 1.444
  309. S. Anwaar, Q. Maqbool, N. Jabeen M. Nazar, F. Abbas, B. Nawaz, T. Hussain, S.Z. Hussain, “The effect of green synthesized CuO Nanoparticles on callogenesis and regeneration of Oryza sativa L”, Frontiers in Plant Sciences 7, (2016), doi: 10.3389/fpls.2016.01330, IF:4.495
  310. F. U. Khan, M. Zubair, I. Khan, M. Z. Ansar, M. K. Alamgir, and S. Nadeem, “Effect of Annealing Temperature on the Structural and Optical Properties of TiO2 Thin Film Prepared by Sol-gel Method”, J. Sci. Res. 8 (3), 267-272 (2016)
  311. T. Hussain, M. A. Gondal, M. Shamraiz, “Determination of Plasma temperature and electron density of iron slag samples using laser induced breakdown spectroscopy”, IOP Conference Series: Materials Science and Engineering 146, 012017, (2016)
  312. T. Hussain, M. Shamraiz, S. Abrar, “Effect of Temperature and Vacuum on the drying rate and various parameters of wood samples, using and indigenously designed and developed vacuum drying system”, International Journal of Technology 5, 795-809 (2016)

Patents - 2016

Inventors
Publication No.
Title
Asghari Bano, Mohibullah, Tariq Mahmood (PAK) 142459 A process for the synthesis of a photocatalyst for the efficient production of Biodiesel.